General Category > French Sandcasts

FRENCH SANDCAST TANKS

(1/2) > >>

kp:
Hi Gerard Can you find information on the benzine tanks of French Sandcast bikes. All 14xxx frame die cast bikes should have wrinkle tanks so I think that some french sandcast bikes have wrinkle tanks KP

4pots1969:
KP, the only Sandcast I can certify 100% with wringle gas tank is the Sandcast E-1014149 having seen with my own eyes the day I've been making photos... I also had confirmation on the phone by the owner of sandcast E-1017199 that his tank had wrinkles and also the clutch cover was a 9/10 but I have not seen him personally...
For other french owners or members who have Sandcast it is very difficult to get information....
One question ... the K0 in diecast E-1014XXX series were they still with a tank wrinkles? To which number the gas tanks wrinkles were stopped? Because if the gas tanks had wrinkle were stopped before 14000 it would mean that the Sandcasts 14000 and 17000 were assembled apart off the assembly lines of Diecast.... But It's just an idea...

kp:
Well Gerard, I'm not so sure of the frame number the wrinkle ends. Mr Rushton will know the frame numbers better than me. To be honest I am the romantic about the French sandcast bikes, so much so, if I can I will in the future seek to buy one of these bikes, but we would be better to listen to those that have a more objective accounting of the frame number cut off. I agree that the E14149 bike should have a wrinkle tank, plus have a socket key switch with a double cut front mudguard (fender). My hope is that all the French sandcast bikes have wrinkle tanks. Thank you for your information on this. KP

4pots1969:


--- Quote from: kp on September 24, 2016, 08:36:52 am --- To be honest I am the romantic about the French sandcast bikes, so much so, if I can I will in the future seek to buy one of these bikes,

--- End quote ---

KP Coming from you, I'm not at all surprised to read these words... And I think you have understood everything...;)

Steve Swan:

--- Quote from: 4pots1969 on September 24, 2016, 05:31:47 am ---KP, the only Sandcast I can certify 100% with wringle gas tank is the Sandcast E-1014149 having seen with my own eyes the day I've been making photos... I also had confirmation on the phone by the owner of sandcast E-1017199 that his tank had wrinkles and also the clutch cover was a 9/10 but I have not seen him personally...
For other french owners or members who have Sandcast it is very difficult to get information....
One question ... the K0 in diecast E-1014XXX series were they still with a tank wrinkles? To which number the gas tanks wrinkles were stopped? Because if the gas tanks had wrinkle were stopped before 14000 it would mean that the Sandcasts 14000 and 17000 were assembled apart off the assembly lines of Diecast.... But It's just an idea...

--- End quote ---

Excellent, Gerard !  i was thinking the same thing as i began reading your post.   Boy, if we could see a 17xxx sandcast with a wrinkle tank !!!!  KP would better remember, but id a certain 12xxx vins had wrinkle tanks and that as high as 14xxx may have been the cut off where wrinkles were last seen...........

we will never stop learning !!!!!!!!!!!!!

Navigation

[0] Message Index

[#] Next page