Honda CB750 Sandcast
The Restoration Shop => Brakes => Topic started by: Sgt.Pinback on November 16, 2015, 11:31:01 am
-
Hi,
what is the correct finish of the outside of the rear brake drum. Is it dull or shiny (polished)?
Whar would you suggest to get the correct finish?
Thanks
-
I would say slightly more brilliant than the satin, but especially not brushed because for me nothing has ever brushed originally for the finishing of aluminum on a Sandcast...
It is difficult to give a particular method because everything depends on the hand that makes...
But me I sanded with fine sandpaper with water to remove defects and scratches and after a paste a polishing without over-emphasize the brilliant...
-
Thanks.
Which final sandpaper No. would you recommend ?
-
It is necessary to adapt the number of paper over the state of the surface to restore...
Plus it is damaged and need to descend to the level of grain
<---120---240--->1000
If they are small scratches to be taken from 600 and after 800 or 1000 (it is the number of grain per cm2)
And after... I use (and you will be happy) to the German product Monidur!!