Honda CB750 Sandcast
The Restoration Shop => Engine Mechanical => Topic started by: patriotcommercial on August 21, 2014, 12:16:49 am
-
Anyone have experience splicing a fin together. I have a finned no rib case with a broken fin. I plan to trim the broken fin, and weld on a fitted piece from a junk yard part. Anyone have any experience with this sort of repair
-
If you can find a good welder it shouldn't be an issue but the die cast material is not so easy to weld. Mark may have some tips about using some pieces from a finned cover as the welding medium