16
Member's Bikes / On the road again !
« on: June 24, 2010, 04:29:49 pm »
Nielsen 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: 1 2
17
New Member Introductions / Re: New Member - Northern California
« on: June 12, 2010, 01:14:39 am »
Hi Dan
Yeah. It`s interesting to hear from people who owned the bikes in the past.
I bet you also wish you still had the CR110
/Karsten
Yeah. It`s interesting to hear from people who owned the bikes in the past.
I bet you also wish you still had the CR110
/Karsten
18
Parts Q&A's and Feedback. / Re: Seat Cover - Original Honda vs. Yamiya
« on: June 11, 2010, 04:01:01 pm »
I have an original seat and just bought a complete T023 seat with red spronge from YAMIYA. Excellent quality.
I asked YAMIYA if the padding on T023 and T087 is the same. They told me that it is not the same without telling me the difference. I don`t know witch of them their seat covers are, but I`m not in doubt that they are much better than the seat covers being offered out there on Ebay or somewhere else. The seat cover on my T023 has a bit more puffy padding than the original, infact mine.
If you only bye a seat cover you have to be aware that you have foam with the correct shape. The foam I have seen on E-bay looks to have the same shape as the seats with the plastic pan. I don`t think it will fit the covers from YAMIYA.
Maby it is possible to fix a bit with the shape of the foam.
/Karsten
I asked YAMIYA if the padding on T023 and T087 is the same. They told me that it is not the same without telling me the difference. I don`t know witch of them their seat covers are, but I`m not in doubt that they are much better than the seat covers being offered out there on Ebay or somewhere else. The seat cover on my T023 has a bit more puffy padding than the original, infact mine.
If you only bye a seat cover you have to be aware that you have foam with the correct shape. The foam I have seen on E-bay looks to have the same shape as the seats with the plastic pan. I don`t think it will fit the covers from YAMIYA.
Maby it is possible to fix a bit with the shape of the foam.
/Karsten
19
"88 Model Distinctions" / Re: 87 Early production model distinctions !
« on: June 09, 2010, 11:27:48 am »
Usefull info here ?
http://www.satanicmechanic.de/enginemods.shtml
I don`t know if we can believe it
Please use google translation from German.
http://www.satanicmechanic.de/enginemods.shtml
I don`t know if we can believe it
Please use google translation from German.
20
Parts Q&A's and Feedback. / Re: Original-looking tires
« on: May 11, 2010, 03:22:12 pm »
I have used:
Dunlop 325Hx19 (54H) GOLD SEAL F11
Dunlop 400H x 18 (64H) GOLD SEAL K87 MKII-M
Dunlop 325Hx19 (54H) GOLD SEAL F11
Dunlop 400H x 18 (64H) GOLD SEAL K87 MKII-M
21
Fenders (mudguards) and Seats / Re: Fender With A Cable Guide
« on: March 06, 2010, 03:05:30 pm »
Sorry -I think he used TIG welding 
22
General Discussion / Re: WHAT A BLOODY GREAT JOB WAYNE
« on: March 06, 2010, 03:00:22 pm »
Done - Thank`s Wayne 
23
Fenders (mudguards) and Seats / Re: Fender With A Cable Guide
« on: March 06, 2010, 02:57:34 pm »
KP
Do you know how the lokal panel shop did the job. The exact proceedure. I have a cut fender with a cable guide, and a guy thought he could do the job, but he was not lucky. He made at little piece of metal witch fits in the hole and welded in by CO-welding. He told me that it is impossible to control the heat on such a thin fender (0,7mm). He burnt through.
I have to say that he is an experienced man.
Karsten
Do you know how the lokal panel shop did the job. The exact proceedure. I have a cut fender with a cable guide, and a guy thought he could do the job, but he was not lucky. He made at little piece of metal witch fits in the hole and welded in by CO-welding. He told me that it is impossible to control the heat on such a thin fender (0,7mm). He burnt through.
I have to say that he is an experienced man.
Karsten
24
Wheels - Hubs - Spokes - Tires / Re: Rolled Rear Wheel (rim)
« on: March 05, 2010, 04:25:05 pm »
I do not know, but on my rims the "DID" mark are on the center of the rim, close to the tube valve.
25
General Discussion / Re: Found A 1969 - What to Look For?
« on: March 02, 2010, 08:03:06 pm »
I would never use PC on a classic bike. A good nomal quality painting will be good enough for a bike that not beeing used in every weather, and it looks better than PC. It will also be much better than Hondas original painting witch was bad quality without base coat.
Karsten
Karsten
26
Lighting Systems and Chassis Electrical / The color of the horn?
« on: February 28, 2010, 09:32:27 pm »
Hi
On pictures of sandcasters I have seen black and grey horns. Witch color is correct for my WIN 2155?
Nielsen
Denmark
On pictures of sandcasters I have seen black and grey horns. Witch color is correct for my WIN 2155?
Nielsen
Denmark
27
Paint - Badges and Component Refinishing / Re: Fuel tank emblems
« on: February 27, 2010, 05:43:08 pm »
Thanks Marty, but is this for a sandcast with the dots inside the letters ?
28
Paint - Badges and Component Refinishing / Fuel tank emblems
« on: February 27, 2010, 05:42:10 pm »
Hi
Are the original emblems made of metal or plastic?
Karsten
Denmark
Are the original emblems made of metal or plastic?
Karsten
Denmark
29
Brakes / FrontBrake Rotor
« on: February 25, 2010, 12:20:42 pm »
Hi
Does all the front brake roters look the same or are they different?
Does all the front brake roters look the same or are they different
?
Pages: 1 2