Honda CB750 Sandcast

The Restoration Shop => Lighting Systems and Chassis Electrical => Topic started by: markb on February 05, 2019, 06:50:19 pm

Title: 19mm Hex Front Turn Signal Stems
Post by: markb on February 05, 2019, 06:50:19 pm: I just discovered (or maybe rediscovered) that #97 has a 19mm hex on the front turn signal stems (later are 17mm). Steven asked me about them and it jogged my memory. I had kinda remembered that there was something different about the stems on 97. The problem is that I was missing one of them so back then I decided to use the 17mm version.

I'm looking at the one I have and I could probably make one from scratch with too much difficulty. The biggest problem would be matching the knurling. It also would not be too much trouble to make them out of newer stems. Just an easy lathe job of turning off the nut and then copper brazing a bigger nut on. A minor problem is the nut is a little thicker but could be machined off. After chrome plating you would not be able to tell the difference.

I couldn't find a reference to this on the site. So do we have any idea how rare this distinction is? What VIN was it used up to? So is this a sought after part?
Title: Re: 19mm Hex Front Turn Signal Stems
Post by: corsa65 on February 06, 2019, 01:38:20 am: #1630 has 17mm

Lester
Title: Re: 19mm Hex Front Turn Signal Stems
Post by: kp on February 06, 2019, 02:04:13 am: 19mm stems are fitted to various models and are still available from Honda new. I’ll see if I can find a part number
Title: Re: 19mm Hex Front Turn Signal Stems
Post by: kp on February 06, 2019, 03:20:51 am: I think this is it 90154-268-670
You could ask the seller to measure the hex size but I’m sure it’s 19mm
https://www.ebay.com.au/itm/NOS-Genuine-Honda-CB-750-500-550-125-175-350-450-Turn-Signal-Bolt-90154-268-670/173740873954?hash=item2873c358e2:g:A6YAAOSw7FRWYKoq (https://www.ebay.com.au/itm/NOS-Genuine-Honda-CB-750-500-550-125-175-350-450-Turn-Signal-Bolt-90154-268-670/173740873954?hash=item2873c358e2:g:A6YAAOSw7FRWYKoq)
Title: Re: 19mm Hex Front Turn Signal Stems
Post by: markb on February 06, 2019, 09:30:00 am: That's the part number that's in the early parts manual and the later CB750-K2 manual. :o So it appears that the same part number is available in either 17mm or 19mm. ??? It sure looks like 19mm in the pic. I did send the seller a question so we'll see. I just assumed that 19mm would no longer be available. That's what you get for assuming. Thanks KP.
Title: Re: 19mm Hex Front Turn Signal Stems
Post by: hondasan on February 06, 2019, 12:32:00 pm: Every original CB750 I have ever owned (maybe 20 now from sandcast #302, another four sandcasts, six die cast, three K1's, four K2's, etc) came with 17mm indicator stems. I have seen both 17mm and 19mm on the 90154-268-670 part number, but the 19mm are always in the newest packaging.
Not doubting anyone else's observations, just reporting my own.

Need observations from other owners of sandcasts, especially the early VINS.......

Chris R.
Title: Re: 19mm Hex Front Turn Signal Stems
Post by: kp on February 06, 2019, 07:22:06 pm: 19mm on mine
Title: Re: 19mm Hex Front Turn Signal Stems
Post by: DW69K0 on February 07, 2019, 11:33:00 am: I check four different Sandcasts, mine all have 17mm fitted.
Best,
DW
Title: Re: 19mm Hex Front Turn Signal Stems
Post by: bojje on February 07, 2019, 03:33:12 pm: Hi!
Both #24/43 and #31/66 has 19 mm. None of my others have them so they are 17 mm.
Bo from Sweden.
Title: Re: 19mm Hex Front Turn Signal Stems
Post by: markb on February 07, 2019, 06:17:31 pm: So it looks like somewhere between 97 and 302 Honda went from 19mm to 17mm even though the 19mm were still around. Thanks for all the input. It will save me a little bit of work.
Title: Re: 19mm Hex Front Turn Signal Stems
Post by: 42barab on February 08, 2019, 04:51:09 pm: Just measured the winker stem bolt size on 2659 - 19 mm. It was restored in 2005, so it's possible older stems were used.