Honda CB750 Sandcast
Buy and Sell => Parts Wanted => Topic started by: kp on July 20, 2018, 02:38:33 am
-
Hi all, I'll pay good money for an early switch or trade for equal or cash adjustment. Thanks KP
-
Anyone out there have one of these switches Thanks
-
A ticket for the Moon would surely be easier to find for you...;D :D
I hope you find it my friend Kp ;)
-
Hi!
The metal part without on-off-on was used above VIN 600 but pointerless killswitch ended around VIN 450. Try to find one of these later ones and grind off the nose at the switch.
Kind regards, Bo from Sweden.
-
As Bo suggests, a later switch can be easily modified. Picture of modified r/h switch fitted to #302.
Chris R.
-
Thanks Bo and Chris,
Yes the fix for the black pointer switch knob is easy enough. The pointless knob type was phased out around frame 450 or so, but the no "Off On Off" top casting continued being used up to around frame 850 with a pointer switch knob. There was some discussion on this some years ago: link attached
http://cb750sandcastonly.com/smf_forum/index.php/topic,1584.0.html (http://cb750sandcastonly.com/smf_forum/index.php/topic,1584.0.html)
-
I would be happy to buy one without OFF ON OFF with a pointer switch Even a switch not working, only a top half.
I have a number of LH switches with the words Made in Japan stamped into the switch bottom half as opposed to the raised Made in Japan if someone would trade plus cash