Honda CB750 Sandcast
General Category => General Discussion => Topic started by: ken736cc on December 11, 2015, 10:26:38 am
-
It appears as if the rear axle is inserted from the sprocket side and the nut is on the brake side as shown in the parts break down. I would like to confirm this as the genuine Honda service manual that I have has some pictures with the nut on the brake side and some on the sprocket side.
Thanks
-
U r correct.
-
Does it really matter what side it is inserted?
-
probably only if one wants their axle position to look like pictures in Honda literature.
-
I have pictures that show it on either side. I am going to install with the nut on the brake side as shown in the parts break down.
-
Go with the illustrated parts breakdown view. Marty K.
-
I have pictures that show it on either side. I am going to install with the nut on the brake side as shown in the parts break down.
could you share the sources of pictures showing nut on sprocket side ?
-
These pictures are from a genuine Honda service manual, p/n 623001, printed 1973. Wheek and tire section, page 128 and 129.
-
Hi Ken, by the look the last photo contradicts the others .?
Garry :)
-
CMSNL.com shows the nut on the brake side. Where do they get their parts fiche pics from?