Honda CB750 Sandcast

Buy and Sell => Parts For Sale => Topic started by: acruz on April 21, 2018, 10:38:31 pm

Title: 28 carbs for sale on ebay
Post by: acruz on April 21, 2018, 10:38:31 pm
I don't know if this is too price but i found this on ebay today:
https://www.ebay.com/itm/1969-Honda-CB750-sandcast-rare-28-carburetors/253522943568?hash=item3b07251e50:g:aVsAAOSwFtZancsp (https://www.ebay.com/itm/1969-Honda-CB750-sandcast-rare-28-carburetors/253522943568?hash=item3b07251e50:g:aVsAAOSwFtZancsp)
Title: Re: 28 carbs for sale on ebay
Post by: kp on April 22, 2018, 01:13:50 am
That's actually not a bad price. Caps and slides are worth that
Title: Re: 28 carbs for sale on ebay
Post by: kp on April 22, 2018, 01:16:18 am
The seller also has a set of early'ish instruments. I believe these are good for bikes from around frame 500 or so
Title: Re: 28 carbs for sale on ebay
Post by: Steve Swan on April 22, 2018, 09:51:22 pm
That's actually not a bad price. Caps and slides are worth that

that is a really clean set of carbs, and the very difficult to find highly perishable 5 mm cable looks in very good condition.  brass horizontal vents would add $500.  a long choke arm would give added value of another $250 or more.  if necessary, one could make a short choke are long.  i know Gerard will appreciate my comment!

i cannot remember - are carb bodies of horizontal vent bodies same as 90' elbow vent bodies?
Title: Re: 28 carbs for sale on ebay
Post by: kp on April 23, 2018, 01:29:17 am
Different
http://cb750sandcastonly.com/smf_forum/index.php/topic,513.0.html (http://cb750sandcastonly.com/smf_forum/index.php/topic,513.0.html)
Title: Re: 28 carbs for sale on ebay
Post by: acruz on April 23, 2018, 02:13:28 am
I think I might have a NOS cable for #28 carbs.  Can anyone look at the photo and see if these are the correct throttle cable for #28 carbs
Title: Re: 28 carbs for sale on ebay
Post by: Steve Swan on April 23, 2018, 10:36:37 am
the cable setup on the left appears 5mm type.   measure the black casing on both cables.  the one on the left should be 5 mm

the chrome elbow that screws into kill switch housing is different than the later 6 mm type.  the early elbow is a more acute bend, than later.  the early elbow is also shorter.