Honda CB750 Sandcast
Buy and Sell => Parts Wanted => Topic started by: Wayne on March 01, 2011, 11:25:30 am
-
My tool kit is incomplete and I would like to locate the remaining tools. If anyone has incomplete sets that would help complete mine, I'm interested. What I have is shown in the pic. The PO owner is searching through his toolbox and junk drawers but it's not looking good. I may have been the one who lost them or pounded them into oblivion when I worked for him when I was young and wreckless! :'( Thanks! :)
(http://cb750sandcastonly.com/coppermine/albums/userpics/10001/honda_tools.jpg)
-
Wayne, the tools you picture are the tools you need ? If so, you have the 6 most difficult to find tools, so that is very good.
Let me go through my spare Honda tools tonight and i'll get back to you.
-
Wayne, i have the 2 different size Phillips screw driver shanks.
Have a black screw driver handle. Of course, red handle is correct.
Also have a fairly decent black foam padded tool pouch with snap closure; it's brittle though. And does not have the little pocket in back to hold feeler gauges.
Let me know if you want any of this, happy to share.
-
Yes, what I have pictured is what I have Steve. I found a kit on ebay but I'm a bit hesitant about spending a couple of hundred on tools at this point. I can put the money to better use with the build right now. I was hoping to find the parts that need to be plated so I could send them out with the rest of my stuff. (I'm assuming tools get re-plated??) Certainly, if you have anything to spare it would be appreciated. Don't leave yourself short for the future though.
http://cgi.ebay.com/ebaymotors/Honda-CB750-Used-Tool-Kit-750-CB750K-1969-1970-1971-_W0QQcmdZViewItemQQhashZitem3364e6c2f4QQitemZ220736176884QQptZMotorcyclesQ5fPartsQ5fAccessories (http://cgi.ebay.com/ebaymotors/Honda-CB750-Used-Tool-Kit-750-CB750K-1969-1970-1971-_W0QQcmdZViewItemQQhashZitem3364e6c2f4QQitemZ220736176884QQptZMotorcyclesQ5fPartsQ5fAccessories)
-
Wayne, i found a straight blade shank also. No prob, they'll go to good use for your kit. The tools are zinc plated. Keep an eye on ebay, under CB175/350/450, you'll find the rest of what you need.
-
Steve's right. I needed to get some tools to complete a few sets and I came up with this lot in the last month and for under $75, so there's some easy finds to be had out there. Certainly look outside the box (or bag ;D) and they will turn up
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=150565867947&ssPageName=STRK:MEWNX:IT (http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=150565867947&ssPageName=STRK:MEWNX:IT)
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=330531084119&ssPageName=STRK:MEWNX:IT (http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=330531084119&ssPageName=STRK:MEWNX:IT)
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=270691706401&ssPageName=STRK:MEWNX:IT (http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=270691706401&ssPageName=STRK:MEWNX:IT)
The real find for me was this lot. :o It has everything a sandcast owner could need and still with sticky labels Bliss :P
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250778321793&ssPageName=STRK:MEWNX:IT (http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250778321793&ssPageName=STRK:MEWNX:IT)
-
Nice score on that last one. It seems like the tough piece to find is the points file. I might have to buy a whole kit to get one.
-
One kit i bought on ebay had an original file.
When i needed another complete kit, I can't remember where i found the other files i needed, but they can be found in automotive stores or tool dealers. While the replacements are not exacly like original, they are so close to original, i was happy to have a completed kit.