Honda CB750 Sandcast

General Category => Links to Auctions and Classifieds => Topic started by: Steve Swan on September 14, 2011, 11:48:58 pm

Title: E365 on ebay
Post by: Steve Swan on September 14, 2011, 11:48:58 pm

The #2 carb appears to have the early style vent - http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150662146415&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150662146415&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649)

Title: Re: E365 on ebay
Post by: Bickle on September 21, 2011, 03:50:34 pm

FYI...I had him measure the choke arm on the carb .........2 1/2"....which I believe is the short arm.
Steve

Title: Re: E365 on ebay
Post by: markb on September 21, 2011, 04:05:39 pm

If the dimensions listed on the "88" differences are correct, 66mm (2.6") and 55mm (2.16"), then I would say 2 1/2" is the long arm.

Title: Re: E365 on ebay
Post by: Steve Swan on September 21, 2011, 04:38:42 pm

i just measured now from the inside of the elbow on long (66mm) and short  (52mm) arms.  (will correct the measurement in "Distinctions.")

Title: Re: E365 on ebay
Post by: Bickle on September 21, 2011, 06:12:09 pm

I stand corrected...depending on where he measured from....(inside or outside of the elbow)

Steve

Title: Re: E365 on ebay
Post by: Steve Swan on September 22, 2011, 08:33:50 pm

Looks like the E365 cases and upper end went to the same bidder; i'm glad to see that.

Title: Re: E365 on ebay
Post by: markb on September 26, 2011, 01:06:00 pm

Someone here?  I'd be happy to see that too.
Mark

Title: Re: E365 on ebay
Post by: kp on September 26, 2011, 03:56:30 pm

Europe I suspect  ;D

Title: Re: E365 on ebay
Post by: kmb69 on September 27, 2011, 12:41:56 pm

Try Texas

Title: Re: E365 on ebay
Post by: Steve Swan on September 27, 2011, 02:31:11 pm

Please tell us if choke arm is, in fact, long.

Title: Re: E365 on ebay
Post by: kmb69 on September 27, 2011, 09:46:51 pm

Will do. Just got notice it shipped Fedex today.

Title: Re: E365 on ebay
Post by: Steve Swan on September 27, 2011, 10:01:17 pm

When you receive the carbs, thanks for sharing the measurement !  With those horizontal brass vents, certainly would think the choke arm should be a long one !

Do you have an appropriately numbered frame for E365 ?  If you do, very cool !