Honda CB750 Sandcast

Buy and Sell => Parts Wanted => Topic started by: Don R on October 16, 2016, 03:51:59 pm

Title: Cylinder block now complete motor. 2695. still need 9 hole cover. sold
Post by: Don R on October 16, 2016, 03:51:59 pm
 I have engine 2695 but it has a 75 top end. I just found a proper head and am still looking for a cylinder block and 9 hole clutch cover.

 I'm still going to make a faux 9 hole cover for the meantime.
Title: Re: Cylinder block
Post by: honda mec on October 21, 2016, 01:32:39 pm
When you got the engine was it painted white by chance? Think I came across this engine in the past, can give you some history on it if it's the same one.
Brian
Title: Re: Cylinder block
Post by: Don R on October 21, 2016, 10:32:50 pm
 No, the P.O. rode this 75 for years, it fell into disrepair and it sat along with 5 other 750's that for one reason or another didn't run. He liked them but wasn't big on working on them or hiring it done. It was in the 75 frame when I bought his 6 750's. Later, I went back for a 78 Goldwing.

 He said he always wondered why it was faster than his other 750's. It may have the K0 cam but not the carbs, head or cylinder. He also thought the crankcase looked different.
Title: Re: Cylinder block
Post by: Sgt.Pinback on October 22, 2016, 07:04:39 am
Got a spare one.
Looking good but you need new barrels. (One is broken and they are oversize).

Donīt know whatīs it worth.

Shipping to USA would be € 70,00 (about US $ 77)
Title: Re: Cylinder block
Post by: Sgt.Pinback on October 26, 2016, 02:51:08 am
OK, no reaction, no PN.

Will have that one refurbished.
Title: Re: Cylinder block
Post by: Don R on October 27, 2016, 11:44:26 am
 Sorry, I didn't check back, I found a cylinder and two heads, hopefully they are something usable.
Title: Re: Cylinder block
Post by: Don R on March 31, 2017, 12:31:56 am
 I drove to West Va. for a sandcast with a replacement case. I installed the top end on the 2695 case, soon it will be complete if anyone is interested or has a proper # frame for it. I'll most likely ebay it.
Title: Re: Cylinder block now complete motor. 2695. still need 9 hole cover.
Post by: Don R on September 07, 2017, 10:58:44 pm
 I made a 9 hole sidecover and sold the engine.