1
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: 1 2
2
Front End and Suspension / Rear shock absorbers.
« on: January 31, 2015, 10:08:50 am »
Are they original?
3
New Member Introductions / Members average age.
« on: February 01, 2014, 03:03:10 pm »
It would be really interesting to know the average age of members of the SOOC.
So we constantly check to see if the interest for our beloved motorcycle it is cultivated also by young people more than we do, or that we were just us alone!
I think that the data can be easily extrapolated from the registration cards of individual members.
It's only an idea.
Riccardo
So we constantly check to see if the interest for our beloved motorcycle it is cultivated also by young people more than we do, or that we were just us alone!
I think that the data can be easily extrapolated from the registration cards of individual members.
It's only an idea.
Riccardo
5
Motorcycle's For Sale / Another sandcast for sale.
« on: October 21, 2012, 12:04:32 pm »
Another one, with label on frame, very late - september - production:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=181002670910&viewitem=&sspagename=ADME%3AB%3ASS%3AIT%3A1123#v4-41
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=181002670910&viewitem=&sspagename=ADME%3AB%3ASS%3AIT%3A1123#v4-41
6
General Discussion / Bo and Riccardo meet in Naples
« on: September 05, 2012, 12:47:52 pm »
Smiling greetings to all SOOC friends, from Bo ad Riccardo in Naples.
7
Links to Auctions and Classifieds / The Gold Seat
« on: February 03, 2012, 02:17:35 am »
Only $1819,00
http://www.ebay.com/itm/190632850272?ssPageName=STRK:MEDWX:IT&_trksid=p3984.m1532.l2649&_trksid=p3984.m1532.l2649#ht_500wt_922
One of the best seats seen on ebay in the last year, but needs sponge restoration.
http://www.ebay.com/itm/190632850272?ssPageName=STRK:MEDWX:IT&_trksid=p3984.m1532.l2649&_trksid=p3984.m1532.l2649#ht_500wt_922
One of the best seats seen on ebay in the last year, but needs sponge restoration.
8
General Discussion / Wishes
« on: December 31, 2011, 01:22:46 pm »
Happy New Year to all members from Italy!
Riccardo
Riccardo
9
Links to Auctions and Classifieds / Tacho on eBay
« on: November 26, 2011, 09:52:57 am »
http://www.ebay.com/itm/370563093111?item=370563093111&viewitem=&sspagename=ADME:B:SS:IT:1123&vxp=mtr#ht_918wt_689
The gems are on surface and not rear side, the orange zone is touchupped, the plastic glass seems replaced and trought wire grommet is not correct or not correctly mounted.
Sorry.
The gems are on surface and not rear side, the orange zone is touchupped, the plastic glass seems replaced and trought wire grommet is not correct or not correctly mounted.
Sorry.
10
General Discussion / Another K0 on eBay
« on: June 18, 2011, 01:28:38 am »
this bike was owned by Vic World, as the seller says:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280697946681#ht_1610wt_1021
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280697946681#ht_1610wt_1021
11
General Discussion / To All The Members: i need an help.
« on: June 05, 2011, 09:13:11 am »
I have a problem:
15 days ago, after a small walk with mine 1000737 (engine 1000940), approximately 30 miles, and I have discovered oil traces on the front part of the cylinders, between the 2 and the 3, in the zone between the base and exhaust manifolds, where is the grey antivibration grommet.
I have cleaned up the oil with a specific product (at cold motor) and, after a week, I have tryed newly.
I have seen, after some miles, the oil emerges newly, in the lower part of the fins.
It is not easy to see from where the oil comes, because -walking- it goes on all the surface of the fins.
The gasket of the cylinders is perfect and dry and also the gasket of the head of the cylinders.
Probably of draft of a blowing that comes from the passage of the distribution chain, than warm it leaves to pass a small oil amount.
I think to a very very small sandcasting porosity of the fusion.
I think that the faster solution is that than to find of cylinders SANDCAST, in order then to try, in according to moment a repair (if possible) of mine.
Someone has of the cylinders sandcast for me, to sell?
Correct type for my engine number?
I would be truly pleasing to who could give a hand to me in order to resolve this probrem.
Thanks in advance.
To all.
15 days ago, after a small walk with mine 1000737 (engine 1000940), approximately 30 miles, and I have discovered oil traces on the front part of the cylinders, between the 2 and the 3, in the zone between the base and exhaust manifolds, where is the grey antivibration grommet.
I have cleaned up the oil with a specific product (at cold motor) and, after a week, I have tryed newly.
I have seen, after some miles, the oil emerges newly, in the lower part of the fins.
It is not easy to see from where the oil comes, because -walking- it goes on all the surface of the fins.
The gasket of the cylinders is perfect and dry and also the gasket of the head of the cylinders.
Probably of draft of a blowing that comes from the passage of the distribution chain, than warm it leaves to pass a small oil amount.
I think to a very very small sandcasting porosity of the fusion.
I think that the faster solution is that than to find of cylinders SANDCAST, in order then to try, in according to moment a repair (if possible) of mine.
Someone has of the cylinders sandcast for me, to sell?
Correct type for my engine number?
I would be truly pleasing to who could give a hand to me in order to resolve this probrem.
Thanks in advance.
To all.
13
General Discussion / Ferrari GTO in Candy Ruby Red
« on: February 27, 2011, 03:48:39 am »
Hello to all,
the passed week, the 22th of February, i have been invited to Maranello for the World Premiere of the all new Ferrari FF.
During the event I have met and spoken with pilots Alonso and Massa and before the Gala Dinner we have been able visits them the assembly line 12 cylinders.
Suddenly, in a zone where the cars go to finish, I have seen a familiar color for my eyes, are approached to me and I have taken a photo of this beautiful Ferrari GTO (limited edition 599 pieces - lightweight - with 670hp), in candy ruby red, special order for a rich gentleman of California, only $25,000,00 more for the varnish on champion, painted by hand.
In the inferior zone of the chassis where it comes mounted the left door is still possible to see the coat base color silver.
I cannot describe my emotions of as the cars come assembled with taylored and maniacal ability in Ferrari.
So I have thought to ours candys ruby red sandcast.
It has been only a curiosity, I hope has made it appeal to you.
the passed week, the 22th of February, i have been invited to Maranello for the World Premiere of the all new Ferrari FF.
During the event I have met and spoken with pilots Alonso and Massa and before the Gala Dinner we have been able visits them the assembly line 12 cylinders.
Suddenly, in a zone where the cars go to finish, I have seen a familiar color for my eyes, are approached to me and I have taken a photo of this beautiful Ferrari GTO (limited edition 599 pieces - lightweight - with 670hp), in candy ruby red, special order for a rich gentleman of California, only $25,000,00 more for the varnish on champion, painted by hand.
In the inferior zone of the chassis where it comes mounted the left door is still possible to see the coat base color silver.
I cannot describe my emotions of as the cars come assembled with taylored and maniacal ability in Ferrari.
So I have thought to ours candys ruby red sandcast.
It has been only a curiosity, I hope has made it appeal to you.
14
General Discussion / From Harley to Sandcast.....How To Do?
« on: February 13, 2011, 04:27:11 am »
Pages: 1 2