1
General Discussion / Re: Starting Work on CB750-1001250
« on: February 17, 2022, 09:39:02 am »
Casting date.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Fuel (gas - petrol) Tanks, Side Covers and Air Box / Re: Fuel cap
« on: February 19, 2021, 11:08:57 am »
Hi mate,
here is inside
here is inside
3
Fuel (gas - petrol) Tanks, Side Covers and Air Box / Fuel cap
« on: February 18, 2021, 02:05:08 pm »
Sorry if this had been discussed yet.
I have that fuel cap.
Has slightly but noticeable thicker brackets for the rear pin than the other ones on my K0.
Is this a sandcast part?
I have that fuel cap.
Has slightly but noticeable thicker brackets for the rear pin than the other ones on my K0.
Is this a sandcast part?
4
Links to Auctions and Classifieds / Re: Sandcast 1928 / E2010 on eBay
« on: December 23, 2020, 11:48:33 am »
Pretty near to mine 1983/E2005
Do you have a link, I cant find it
Do you have a link, I cant find it
5
General Discussion / Re: Not sure if i like this or not... Well, it IS a die cast after all...
« on: December 01, 2020, 02:39:41 pm »
Might be too hard for you US boys. So enjoy as long as you can see it
6
Links to Auctions and Classifieds / Re: Wrinkle Tank For Sale
« on: November 21, 2020, 12:10:19 pm »
I have still mine for sale.
EURO 600 + shipping ex Germany. Actually not possible to USA due to Corona
EURO 600 + shipping ex Germany. Actually not possible to USA due to Corona
7
General Discussion / Re: Covering on Original Levers
« on: November 12, 2020, 03:48:05 pm »
Never done it myself but I would try it with liquid latex.
Maybe something like this that makes it thicker
https://www.ebay.com/itm/1-Litre-Liquid-Latex-and-100ml-Thickening-Agent-Mould-Making-Dipping-Rubber/164238284448?hash=item263d5d56a0:g:YZUAAOSwEmFapvFF
Or some dozens of layer of clear coat?
Maybe something like this that makes it thicker
https://www.ebay.com/itm/1-Litre-Liquid-Latex-and-100ml-Thickening-Agent-Mould-Making-Dipping-Rubber/164238284448?hash=item263d5d56a0:g:YZUAAOSwEmFapvFF
Or some dozens of layer of clear coat?
8
Parts Wanted / Re: Double front disc
« on: October 29, 2020, 12:52:57 pm »
Thanks.
Its not the same to give a K0 a second disc as later modells due to the wider hub.
Here´s another pic, work-in-process
Its not the same to give a K0 a second disc as later modells due to the wider hub.
Here´s another pic, work-in-process
9
Parts Wanted / Double front disc
« on: October 29, 2020, 10:01:45 am »
Looking for hardware for double front disc with KO hub.
As far as I can remember from 1983 (pic with my first K0) I´ll need a different retainer (
, cover (9) and longer bolts (16). Maybe another speedo gear as well?
Rght hand caliper/holder and a second K0 disc I have.
As far as I can remember from 1983 (pic with my first K0) I´ll need a different retainer (
, cover (9) and longer bolts (16). Maybe another speedo gear as well?Rght hand caliper/holder and a second K0 disc I have.
10
Front End and Suspension / Re: Rear shocks on a 1969
« on: October 29, 2020, 09:51:11 am »
Still good enough for a short evening run (here on my diecast)
11
Exhaust / Re: Tube rubber muffler between silencers
« on: October 28, 2020, 03:37:49 pm »
Never seen those but thats sound to be a good solution.
12
Front End and Suspension / Re: Rear shocks on a 1969
« on: October 28, 2020, 03:32:57 pm »
I´ d say those on ebay are K1.
5 times around
https://www.ebay.com/itm/Honda-NOS-CB750-Set-Rear-Shocks-CB-750-CB750K0-K1-52400-300-020XW/223547203809?epid=1811838705&hash=item340c73a0e1:g:JYUAAOSwVL1WAyPu
Here are mine and I´m pretty sure those are the original ones my sandcast came with.
7 times around
5 times around
https://www.ebay.com/itm/Honda-NOS-CB750-Set-Rear-Shocks-CB-750-CB750K0-K1-52400-300-020XW/223547203809?epid=1811838705&hash=item340c73a0e1:g:JYUAAOSwVL1WAyPu
Here are mine and I´m pretty sure those are the original ones my sandcast came with.
7 times around
13
Fuel (gas - petrol) Tanks, Side Covers and Air Box / Re: Reproduction Side Cover Identification
« on: October 23, 2020, 01:07:38 pm »
Thanks for info!
14
Everything K0 / Re: German diecast Ko
« on: July 20, 2020, 01:18:12 pm »
Just came home from adding a few km.
15
Links to Auctions and Classifieds / Re: Sandcast Speedo
« on: July 19, 2020, 01:16:21 pm »
A lot of money.
Anyway I' ve never seen a sandcast speedo in km/h
(BTW, just checking his other items....selling some cool stuff)
Anyway I' ve never seen a sandcast speedo in km/h
(BTW, just checking his other items....selling some cool stuff)