Honda CB750 Sandcast

Cylinder block now complete motor. 2695. still need 9 hole cover. sold

Don R · 8 · 3826

Don R

  • Full Member
  • ***
    • Posts: 233
    • View Profile
 I have engine 2695 but it has a 75 top end. I just found a proper head and am still looking for a cylinder block and 9 hole clutch cover.

 I'm still going to make a faux 9 hole cover for the meantime.
« Last Edit: September 09, 2017, 10:53:37 pm by Don R »


honda mec

  • Newbie
  • *
    • Posts: 33
    • View Profile
When you got the engine was it painted white by chance? Think I came across this engine in the past, can give you some history on it if it's the same one.
Brian


Don R

  • Full Member
  • ***
    • Posts: 233
    • View Profile
 No, the P.O. rode this 75 for years, it fell into disrepair and it sat along with 5 other 750's that for one reason or another didn't run. He liked them but wasn't big on working on them or hiring it done. It was in the 75 frame when I bought his 6 750's. Later, I went back for a 78 Goldwing.

 He said he always wondered why it was faster than his other 750's. It may have the K0 cam but not the carbs, head or cylinder. He also thought the crankcase looked different.
« Last Edit: October 21, 2016, 10:35:21 pm by Don R »


Sgt.Pinback

  • Hero Member
  • *****
    • Posts: 695
    • View Profile
Got a spare one.
Looking good but you need new barrels. (One is broken and they are oversize).

Donīt know whatīs it worth.

Shipping to USA would be € 70,00 (about US $ 77)
Cheers, Uli (Leonberg, Germany)


Sgt.Pinback

  • Hero Member
  • *****
    • Posts: 695
    • View Profile
OK, no reaction, no PN.

Will have that one refurbished.
Cheers, Uli (Leonberg, Germany)


Don R

  • Full Member
  • ***
    • Posts: 233
    • View Profile
 Sorry, I didn't check back, I found a cylinder and two heads, hopefully they are something usable.


Don R

  • Full Member
  • ***
    • Posts: 233
    • View Profile
 I drove to West Va. for a sandcast with a replacement case. I installed the top end on the 2695 case, soon it will be complete if anyone is interested or has a proper # frame for it. I'll most likely ebay it.