Another complete restored sandcast on eBay

[1941wld]

Dear 1941wld,

2007


- angelodarcangelo Click "respond" to reply through Messages, or go to your email to reply

 




--------------------------------------------------------------------------------
From: 1941wld
To: angelodarcangelo
Subject: Vehicle condition: 1941wld sent a message about Honda : CB #160515193002
Sent Date: Dec-05-10 17:46:22 PST


                       
                       
Dear angelodarcangelo,

Is this bike a Vic World production bike? If so, what year did you buy it from World Motorcycles?
Regards,


- 1941wld

[markb]

I am thinking with all of this apparent restoration work that appears to be done, that possibly the odometer could have been re-set back to zero and 600+ miles put on it.  Only this can be confirmed by the seller.

Joe K.

600 miles on a 2007 Vic is probably about normal.

[kp]

Given that answer we can accept the quality is as we thought; superb No doubts about the seat either. The bike will be good buying for the high bidder KP

[markb]

I agree of course that the quality will be top notch but after thinking about it, he does say in the add "All original" when he should be saying "completely restored".  Just for fun, based on everyone's observations I'm going to change my prediction on the selling price to $26,000 to $28,000.  Anyone else venture a guess.
Mark

[Wayne]

I think it's worth all of that Mark. The reality is if you want to spend just under 30K you can get a fresh VW bike. From what I have seen in my short life in in sandcast world, the bikes that have gone beyond that price were for the most part un-restored. For example Vic's 445?? mile bike at $41,900.00?? Keeps me hoping that there is one more jewel to be found in my neck of the woods! 

[mrhonda2u]

Has anyone just came out and asked the man if this is a VIc World Bike ??   I think it is

[markb]

I think the sellers reply to 1941wld indicates that.

[markb]

I think it's worth all of that Mark. The reality is if you want to spend just under 30K you can get a fresh VW bike. From what I have seen in my short life in in sandcast world, the bikes that have gone beyond that price were for the most part un-restored. For example Vic's 445?? mile bike at $41,900.00?? Keeps me hoping that there is one more jewel to be found in my neck of the woods! 

You might be right but technically it is a used VW.  Seems that I remember another later VIN VW go for about $28,000 within the last year (not from Vic).  A good condition, unrestored, early VIN will definately command more money.  It will be interesting to see what it goes for.
Mark

[kp]

I agree of course that the quality will be top notch but after thinking about it, he does say in the add "All original" when he should be saying "completely restored".  Just for fun, based on everyone's observations I'm going to change my prediction on the selling price to $26,000 to $28,000.  Anyone else venture a guess.
Mark

Hmmmmm! Mark, I'll venture under $20k Maybe around $18k  KP

[Riccardo]

I've emailed 2 times more the seller:
he replyed me:

1) 1004018, Yes it is a Sandcast;
2)Original bike. Not a restoration.The bike came from a collector.

Sincerely i think that's a great bike.
And if is a VW restoration, this is a very big reference for the new owner.
Vic use in the restoration only original NOS parts.
Ok, no lotus root or no no. or other maniacal parts.......but original parts.
None has the stock as Vic!!!!!

I've 3 sandcast and 1 KO, the garage is full anf for me is impossible to buy another byke from USA.
My wishes at future owner of this bike.

[mrhonda2u]

 Hey guys
 If you look at the pic of the right veiw of the rear wheel you will notice that there is HM300 on the top right pipe just in front of the heat shield and the bike comes with a service manual, owners manual and touch up paint.

[mrhonda2u]

 The front brake hoses has a 10-76 production date printed on it

[Riccardo]

The bike is on You Tube:

L1010044

[Wayne]

The gentleman doing a walkaround of the bike"

L1010044

[Wayne]

haha you beat me to it riccardo.  By the way as you will notice I added a function to the board where we can now embed video's.