first off, im new here so if im out of line on prices or if i post something incorrectly please let me know, id love to learn as much as i can about these bikes.
ive been holding some parts from an old repair shop to use some day, but dads K3 needs some work, so im putting this all up for sale. most of it has shelf dust from the shop and some grime. i didnt clean anything up prior to photos.
all prices are shipped OBO in the lower 48 states. if outside the lower 48 message me to discuss shipping.
my photos may show up in reverse, so please reference photo comments to be clear. thanks!
PHOTOS HEREhttps://flickr.com/photos/136570373@N02/sets/7215766064362392028 tops for sandcast carbs. 7 tops 6 rings. with adjusters, please see photos.
set of 4- 450$
set of 3 tops and 2 rings 300$
or all of them 650$
original backing plate with stamped numbers (B750A), asking 75$
is this reasonable? i see repops list for 100$+
"set a" carbs in photos 225$
no visible damage, just dirty. brass floats and correct small drain screw bowls.
dirty but nice set, not stuck, slides intact. all posts good and floats appear usable. just clean real good and go.
"set B" carbs in photos 225$
the one with the 4 pull cable attached.
bowls have large drain screws. missing a needle or two and one is bent. slides intact and not stuck.
black floats, pretty clean inside. probably drained and stored on a shelf.
"set c" 225$
no cable, slides intact and not stuck.
inside bowls are immaculate! no floats, some jets.
someone cleaned these really well inside but not outside. missing two bowl clamps
three small drain screw bowls and one newer large drain
parts set of carbs. 100$
broken and repaired backing plate, no tops. some spraypaint, but good bodies
all posts intact, no visible damage other than backing plate and remaining floats.
extra bowls. one large drain and 5 early model small drain bowls. could possible swap these onto set B and c for the right price. i just didnt get them that way so they are displayed individually. will sell after all carbs are gone. it just makes sense to put the small drain plug bowls on the full sets and the large drain plugs on the parts set, apologies i didnt realize this until after the photos were taken.
i also have a k0 oil tank. i had three on ebay before i got access to this forum. i have one left. make me an offer and id be happy to sell it to someone on here instead.
http://www.ebay.com/itm/1969-1970-HONDA-CB750-SANDCAST-K0-OIL-TANK-CB-750-/191716929850?hash=item2ca338313a:g:6rcAAOSwhcJWIGVB&vxp=mtri know this isnt all sandcast stuff, some is just K0, but i wanted to list it here for the guys doing restorations first, ill put it on SOHC forums after people here get a shot at it.
https://flickr.com/photos/136570373@N02/sets/72157660643623920