Honda CB750 Sandcast

Restoration by Puccio from Tuscany

ack3r · 161 · 59606

ack3r

  • Full Member
  • ***
    • Posts: 109
    • View Profile
Hi, ;D
I seen on more picture in  Internet, That some black parts are plus glossy.
For example the Frame is glossy instead other part's are minus glossy.
I think that in origins the frame was painted in a mode and others parts, powder painted.
What do you think?
Maurizio
Cb 750 Four k0 1970  "restoring ended"
Xr600r 1986 ''work in progress''
Cb 750 Fa 1980
Vespa Vba1t 150 year 1959


ack3r

  • Full Member
  • ***
    • Posts: 109
    • View Profile
Hi friends, ciao amici  :P
recent works.....
In Italy we use Tankerite, is a good bicomponent product for tank's .
So, in the last motor show (circuit of Imola), I buyed Tankerite.
To this link You can see a video.

http://www.youtube.com/watch?v=slRBrC_aRfg&feature=player_embedded#

The procedure is simple and is very important follow the indication's.

to the end is nice to see, inside the color is red and hard.

during the work:

https://lh4.googleusercontent.com/-JjLu2UBFrLM/TrBLjcimN9I/AAAAAAAABAo/rKVFtkF6lWg/s800/Forconi1047.jpg

https://lh6.googleusercontent.com/-Oa5DJPmyOcY/TrBLhxYOOoI/AAAAAAAABAc/0SYnURR9otw/s800/Forconi1049.jpg

finished work:

https://lh6.googleusercontent.com/-8g7n2DPJwGY/TrhGtMddITI/AAAAAAAABBY/-JPgDG7LuGE/s800/forconi1069.jpg
Cb 750 Four k0 1970  "restoring ended"
Xr600r 1986 ''work in progress''
Cb 750 Fa 1980
Vespa Vba1t 150 year 1959


Steve Swan

  • Hero Member
  • *****
    • Posts: 2705
    • View Profile
    • cb750sandcastonly.com
Much discussion (in past) by several members on paint subject;  member concensus believes no powder coat.  If i remember correctly, members concensus believes switches and master cylinder are anodized.  The upper steering clamp is approximately 70% gloss black.  Frame gloss black(not deep gloss.)  Other frame parts less gloss.


ack3r

  • Full Member
  • ***
    • Posts: 109
    • View Profile
Much discussion (in past) by several members on paint subject;  member concensus believes no powder coat.  If i remember correctly, members concensus believes switches and master cylinder are anodized.  The upper steering clamp is approximately 70% gloss black.  Frame gloss black(not deep gloss.)  Other frame parts less gloss.

Hi Steve,
what do you think about the Tankerite ?
do you like this?

Maurizio
Cb 750 Four k0 1970  "restoring ended"
Xr600r 1986 ''work in progress''
Cb 750 Fa 1980
Vespa Vba1t 150 year 1959


Steve Swan

  • Hero Member
  • *****
    • Posts: 2705
    • View Profile
    • cb750sandcastonly.com
Hi Maurizio,

Is Tankrite a product available in Europe ?  I did a websearch and could not find info.  I have no opinion, i don't know anything about the Tankrite.  In video, appears quite viscous.

In USA, we have a product called Kreem.  I've used Kreem in several tanks over the past 30 years.  Kreem is methyl ethyl ketone (MEK) based.  Kreem requires a perfectly clean tank with all rust removed using a weak phosphoric acid prep.  I have seen a number of tanks where Kreem was used and over the years the Kreem coating let loose, hanging in tank, even when tank is prepped properly.  Kreem is not easy to remove, only by using multiple baths of MEK.  Also, coating with Kreem, the thickness of coating difficult to control, because Kreem is rather viscous.  Kreem cautions against too thick coating, but difficult to control because of viscosity  http://kreem.com/

Recently A couple years ago, i learned of new product, POR-15.  I used in badly rusted tank on 2157.  (Elsewhere i posted my experience removing the rust using washing soda and electrolysis, which REALLY removes all rust extremely effectively.)  Then i used POR-15 for the first time, a coating that reacts to bare metal and to any remaining rust.  POR-15 is not MEK based, but the coating is essentially clear and virtually non-detectable after application.  I was VERY pleased with end result using POR-15.  Coating thickness all the same; POR-15 is not viscous like Kreem.  http://www.por15.com/whatispor15.asp

These are just my thoughts and experience.


Riccardo

  • Sr. Member
  • ****
    • Posts: 362
    • View Profile
Steve,

i've visited the Kreem  site.

The Blue Shield product can be a care preservation for the Lotus Root.

What you think about?
Riccardo
Your Italian friend.
737/940 Restored
1081/1362 Preserved
1256/665 Restored - ex Owner: Chris R.
10253/10315 (K0) Next project
1969 - Kawasaki H1 Mach III low ign cover - Restored
1969 - Kawasaki H1 Mach III high ign cover - Restored
1971 - Kawasaki H1A - Restored
1973 - Kawasaki H1D - Preserved
1973 - Kawasaki Z1 Blackhead - Restored
1971 - Norton Commando SS - Preserved
1978 - Honda CBX - Unmolested Museum Quality
1988 - Honda CB 400SS - Unmolested
1997 - BMW R80 GS Basic - blue frame - Museum Quality
2007 - BMW HP2 Megamoto - blue frame - New



ack3r

  • Full Member
  • ***
    • Posts: 109
    • View Profile
Hi Maurizio,

Is Tankrite a product available in Europe ?  I did a websearch and could not find info.  I have no opinion, i don't know anything about the Tankrite.  In video, appears quite viscous.

In USA, we have a product called Kreem.  I've used Kreem in several tanks over the past 30 years.  Kreem is methyl ethyl ketone (MEK) based.  Kreem requires a perfectly clean tank with all rust removed using a weak phosphoric acid prep.  I have seen a number of tanks where Kreem was used and over the years the Kreem coating let loose, hanging in tank, even when tank is prepped properly.  Kreem is not easy to remove, only by using multiple baths of MEK.  Also, coating with Kreem, the thickness of coating difficult to control, because Kreem is rather viscous.  Kreem cautions against too thick coating, but difficult to control because of viscosity  http://kreem.com/

Recently A couple years ago, i learned of new product, POR-15.  I used in badly rusted tank on 2157.  (Elsewhere i posted my experience removing the rust using washing soda and electrolysis, which REALLY removes all rust extremely effectively.)  Then i used POR-15 for the first time, a coating that reacts to bare metal and to any remaining rust.  POR-15 is not MEK based, but the coating is essentially clear and virtually non-detectable after application.  I was VERY pleased with end result using POR-15.  Coating thickness all the same; POR-15 is not viscous like Kreem.  http://www.por15.com/whatispor15.asp

These are just my thoughts and experience.

Hi Steve,
In this moment I'm to work  :-\
Ok....... ::)
In Italy, many person buy tankerite for restoring the tank.
This is a famous  product in Italy.
In every box there is a bottle of tankerite, catalyst and phosphoric acid (in low percentual).
After the mixing Tankerite is still creamy and is necessary apply 5-10 % of alcool.
In this mode Tankerite becomes very liquid, with perfect application.
After many years I saw many tank's  in good  conditions.
Attention, after the application is necessary to wait one weeks for use.

Please see also this web site:

http://www.restom.net/kit-traitement-de-reservoir-150.htm

"Is in french language, but You can use google for translate"
This is a similar product of another famous  brand

Bye   ;)
Cb 750 Four k0 1970  "restoring ended"
Xr600r 1986 ''work in progress''
Cb 750 Fa 1980
Vespa Vba1t 150 year 1959


ack3r

  • Full Member
  • ***
    • Posts: 109
    • View Profile
Hi friends,  work go on...

Now is the time for the paint frame, my ultimate opinion (after many brainstormig) is for powder paint.
Near my home there is an important factory specialized in paint.
They prefer apply before special primer (anti corrosive) and after powder paint.
They offer warranty for them work.

Some pictures..

https://lh5.googleusercontent.com/-Elj5xZa7hh0/TtPzerjnG-I/AAAAAAAABFY/cHMFGGvdB98/s800/281120111252.jpg

https://lh3.googleusercontent.com/-nvFUeZT1j6E/TtPzen0py-I/AAAAAAAABFU/Udky-2ZMttA/s800/281120111253.jpg

I am very happy, I think that the glossy is good

After the frame painted I decided to bring the engine to my friend (for disassembly)
For me is the first time, I don't want do mistakes.
He is specialized to disassembly the  engine, very good man :)

https://lh5.googleusercontent.com/-GahmKaUYAsw/TtadmAWqxOI/AAAAAAAABFw/FZ7qAAiJ5mo/s800/291120111255.jpg

The weight is very high, I and My friend still have pain to arm :) ;D
Cb 750 Four k0 1970  "restoring ended"
Xr600r 1986 ''work in progress''
Cb 750 Fa 1980
Vespa Vba1t 150 year 1959


ack3r

  • Full Member
  • ***
    • Posts: 109
    • View Profile
Sorry, I forgot.....

Also the Carbs must be restored.

Where I work there is ultrasonic bath, this is the better solution for wash the carbs.
Before to insert the carbs is necessary put the special liquid in the water and to warm

before the bath...

https://lh5.googleusercontent.com/-lOUjbfp1AKw/TtBLkeOHd2I/AAAAAAAABDY/c9ngyS2DJbI/s800/211120111202.jpg

After the bath I saw the the color is changed.
Some halo of blue/purple is possible to see now.

https://lh5.googleusercontent.com/-M5nBlE50hWQ/Ttadskn0fqI/AAAAAAAABF8/1wMuHyOPFfY/s800/291120111259.jpg

after a short pass with special ultra fine sponge (steel), the color is changed to turn in new this...

https://lh4.googleusercontent.com/-WDOfiEkEYWs/TtadsK5lDUI/AAAAAAAABF4/oz5-JpOoYiY/s800/291120111258.jpg
« Last Edit: December 01, 2011, 03:32:38 pm by ack3r »
Cb 750 Four k0 1970  "restoring ended"
Xr600r 1986 ''work in progress''
Cb 750 Fa 1980
Vespa Vba1t 150 year 1959


ack3r

  • Full Member
  • ***
    • Posts: 109
    • View Profile
Tomorrow morning I post some picture about ultra-fine sponge (steel).

Bye

Maurizio

Cb 750 Four k0 1970  "restoring ended"
Xr600r 1986 ''work in progress''
Cb 750 Fa 1980
Vespa Vba1t 150 year 1959


ack3r

  • Full Member
  • ***
    • Posts: 109
    • View Profile
Tomorrow morning I post some picture about ultra-fine sponge (steel).

Bye

Maurizio



This is the special sponge (in steel)

https://lh4.googleusercontent.com/-l-bDVHS8IwE/Ttk2UK_6ZgI/AAAAAAAABGI/LSxAtL8cPHE/s800/021220111262.jpg

bye
Cb 750 Four k0 1970  "restoring ended"
Xr600r 1986 ''work in progress''
Cb 750 Fa 1980
Vespa Vba1t 150 year 1959



ack3r

  • Full Member
  • ***
    • Posts: 109
    • View Profile
  Hi friend,
....much time has passed.... ;D
So, I must to upgrade the restoring.
I have two video.
The first shows to all, the necessary operations  to remove the rust from bolts and screw:

http://www.youtube.com/watch?v=Adu-SGRwb_Q#

In the second video We can to see my father (Jeeg robot in steel).
The grey paint:

http://www.youtube.com/watch?v=igGVJl3Gyjg&feature=channel#

Ciao
Cb 750 Four k0 1970  "restoring ended"
Xr600r 1986 ''work in progress''
Cb 750 Fa 1980
Vespa Vba1t 150 year 1959


ack3r

  • Full Member
  • ***
    • Posts: 109
    • View Profile
Please Friends, I would an information.

I must to change the pistons set, with the  over size +0,25.
So, I seen some ebayer and also David Silver spares.
The price is 350$ for one complete set.
But today afternoon I seen that in Canada there is http://www.siriusconinc.com
He propose this complete set:

http://www.siriusconinc.com/pro-detail.php?pid=&product_id=4644

What should I do?
Do You know this brand / seller ?
Please help me

ciao
« Last Edit: February 21, 2012, 03:42:38 pm by ack3r »
Cb 750 Four k0 1970  "restoring ended"
Xr600r 1986 ''work in progress''
Cb 750 Fa 1980
Vespa Vba1t 150 year 1959