 |
Production Models |
16. Transmission
Item |
Change serial number |
Comment |
|
|
|
|
Set ring A, ball bearing |
1 - 5306 |
|
|
Set ring B, ball bearing |
5307 - 7414 |
|
|
Gear, final drive 48t |
1 - 5306 |
|
|
Gear, final drive 48t |
5307 - 7414 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17. Gear Shift Fork - Drum
Item |
Change serial number |
Comment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18. Final Driven Shaft - Kick Spindle
Item |
Change serial number |
Comment |
|
|
|
|
Sprocket drive, 16t |
1 - 3527 |
pn 23801-292-010, per 69/7 parts manual |
|
Sprocket, drive 16t |
1 - 3527 |
pn 23801-300-305, per 2/71 parts manual |
|
Sprocket, drive 17t |
1-3527 |
pn 23801-300-315 per 12/71 parts manual.
Supercedes 23801-300-305 (16t) above. |
|
Sprocket, drive 16t |
3527 - 7414 |
pn 23801-300-000, per 2/71 parts manual.
Sprocket body width increased. |
|
Sprocket, drive 17t |
3528 - 7414 |
pn 23801-300-010, per 12/71 parts manual.
Supercedes 23801-300-000 above. |
|
Shaft, compete, final drive |
1 - 3527 |
23520-300-000 per 69/7 manual |
|
Shaft, complete, final drive |
1 - 3527 |
23520-300-305, per 71/2 manual |
|
Shaft, complete, final drive |
3528 - 7414 |
23520-300-010, per 71/2 manual.
Changed to accept wider body width sprocket above. |
|
Bolt, 6x12
Bolt, 6x16 |
1 - 3527
3528 - 7414 |
Per 69/7 manual, pn 92000-06012. Per 71/2 manual, pn 92000-060120A.
Per 71/2 manual, 92000-06016 |
19. Upper Crankcase
Item |
Change serial number |
Comment |
|
|
|
|
Crankcase, upper |
1 - 219 |
Per 69/7 manual, pn 11100-300-070. Per 71/2 manual, "nla," use 11010-300-070 which is an upper / lower case "set" |
|
Crankcase assembly |
1 - 219 |
11010-300-070
supersedes to 11010-300-080 and then again to 11010-300-415 |
|
Crankcase assembly |
1 - 7414 |
11010-300-415
Per 71/2 manual, upper & lower cases listed as set only.
Per 71/2 manual, pn notation as follows:
pn 91315-044-000, O-ring 19.4x2.8 for 1 - 7414
pn 91319-300-000, O-ring 13x2.5 for 220-7414
pn 94301-10160, pin dowel, 10x16, 220 - 7414.
(These two preceding 220-7414 pn's not listed in 69/7 manual.) |
|
Plug, oil tube |
1 - 219 |
15337-300-000
Uses 16mm packing |
|
Plug, oil tube |
220 - 7414 |
15337-300-010
Uses 13mm "O" ring |
|
Rubber, packing |
1 - 219 |
91303-035-000 (qty - 4) |
|
Rubber, packing |
220 - 7414 |
91303-035-000 (qty - 3) |
|
"O" ring, 13 x 2.5mm |
220 - 7414 |
91319-300-000 |
|
Cap, oil path |
1 - 7414 |
The shoulder of the cap (15331-300-000) is narrow, not wide. |
|
Bolt, hex 8x80
Bolt, hex 10x82 |
1 - 140
141 - 7414 |
92100-08080-0S
90048-300-000
(Bolt located in LH rear corner crankcase)
Per 69/7 manual, these two different bolts are indicated as used on 1 - 7414, however the refernce number for small bolt is "10" and the reference number for the large bolt is "10A" |
20. Lower Crankcase
Item |
Change serial number |
Comment |
|
|
|
|
Crankcase, lower |
1 - 219 |
Per 69/7 manual, pn 11200-300-080. Per 71/2 manual, "nla," use 11010-300-070 which is an upper / lower case "set" |
|
Crankcase assembly |
1 - 219 |
11010-300-070
supersedes to 11010-300-080 and then again to 11010-300-415 |
|
Crankcase assembly |
220 - 7414 |
11010-300-415
Per 71/2 manual, upper & lower cases listed as set only |
|
Hose A, complete, oil |
1-232 |
Smooth fabric, ferrule not crimped, pn 15510-300-007 |
|
Hose B, complete, oil |
1-??? |
Smooth fabric, ferrule not crimped, pn 15520-300-007 |
|
Hose A, complete oil |
???-??? |
Webbed fabric, ferrule not crimped |
|
Hose B, complete, oil |
???-??? |
Webbed fabric, ferrule not crimped |
|
|
|
|
|
|
|
|
Back to Table of Contents
| |
